OPERATING INSTRUCTIONS
1. How to install/tighten threaded fasteners.
Turn torque setting switch (part D) from right to
left to desired torque setting and press trigger
(part C) to engage. The tool anvil (part B) runs
clockwise. (See Figure 1)
2. How to install/tighten threaded fasteners.
Turn torque setting switch (part D) from left to
right to desired torque setting and press trigger
(part C) to engage. The tool anvil (part B) runs
counterclockwise. (See Figure 2)
When turn the torque setting switch (D) slowly
forward, the sound of clicks will be detected. The
clicks do not denote a specific power output but
are only for reference. When the switch arrow
points to “Lo”, it stands for the least amount of
power, which is suitable for just mounting
threaded fasteners. When the switch arrow points
to “Hi”, it stands for the most amount of power,
which is for tightening threaded fasteners from
workpiece with ease. In reverse, the tool also has
the function of gear, which is suitable for removing
screws of different specifications. Please choose
the appropriate torque needed on the workpiece.
(See figure 3)
This tool features a power regulator valve.
NOTE
Setting Torque in Forward Torque in Reverse
LO Click
100 ft-lbs (+/-10%)
180 ft-lbs (+/-10%)
200 ft-lbs (+/-10%)
180 ft-lbs (+/-10%)
200 ft-lbs (+/-10%)
220 ft-lbs (+/-10%)
MED Click
HI Click
11
