Kobalt 437513 Скачать руководство пользователя страница 84

Страница: 84 / 95

SAFETY INFORMATION

Personal Safety

sense when operating a power tool. Do not use a power tool

or medication.

A moment of inattention while operating power

tools may result in serious personal injury.

&'#

protection.

Protective equipment such as a dust mask, non-

skid safety shoes, hard hat, or hearing protection, used for
appropriate conditions, will reduce personal injuries.

the off-position before connecting to a power source and/or
battery pack, picking up or carrying the tool.

Carrying power

% % & %
have the switch on invites accidents.

power tool on.

A wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

all times.

This enables better control of the power tool in

unexpected situations.

your hair, clothing and gloves away from moving parts.

Loose clothing, jewelry or long hair can be caught in moving
parts.

and collection facilities, ensure that these are connected
and properly used.

Use of these devices can reduce dust-

related hazards.

Содержание 437513
































































































Результаты поиска

Содержание 437513

Отзывы:

Похожие инструкции для 437513

Бренды по названию

Популярные бренды

Kobalt 437513, Руководство пользователя

Результаты поиска

Содержание 437513

Отзывы:

Похожие инструкции для 437513

Бренды по названию

Популярные бренды