9
OPERATING INSTRUCTIONS
] 4=7
a. Align the rib of the belt clip (E) with the hole on the
base of the driver.
b. Insert the screw (G) and tighten the screw securely
with a Phillips screwdriver (not included).
NOTICE:
The belt clip and drill bit holder are
interchangeable between the left and right side of the
driver.
1=7
a. Use a Phillips screwdriver to loosen the screw
holding the belt clip (E) to the driver.
b. Remove the screw and the belt clip (E).
4=;
a. Align the rib of the bit holder (F) with the hole on the
base of the impact driver.
b. Insert the screw (G) and tighten the screw securely
with a Phillips screwdriver (not included).
3
E
G
F
G
5
4
E
