KOB KOB PYROT SERIES страница 12 Скачать руководство пользователя

Страница: 12 / 32

6.3.2 The F4 KEY: "PYROT Loader System"

(mask number) parameter (factory setting)

(01) Cleaning (NO):

This activates the cleaning function. Exhaust fan
at starting speed, and moving grate on.

(05) Moving grate, pause (60 s):

Cycle switching for the moving grate (adjustable
pause time, impulse fixed, 2 seconds).

(07) Metering container,empty running time
(5s):

Running time for feed auger with the light barrier
for the feed auger clear

prompt for material

(08) Conveyor Device 1/Delay (3 s):

Delay before connecting Conveyor System 1
(e.g. rotary valve, conveyor auger, etc.)

(09) Conveyor System 1, after-running (0 s):

After-running of Conveyor System 1
(e.g. pneumatic conveyor, etc.)

(10-37) Conveyor Systems 2-15:

Delay before connecting or after-running of Con-
veyor Systems 2 to 15

(38) Extraction System 1/Delay (3 s):

Delay before connecting Conveyor System 1
(e.g. spring-operated extraction system, inclined
extraction system, etc.)

(39) Extraction System 1/Impulse (5 s):

Impulse for the cycle switching for Extraction Sys-
tem 1 (e.g. spring-operated extraction system, in-
clined extraction system, etc.)

(40) Extraction System 1, Pause (0 s):

Pause in the cycle switching for Extraction Sys-
tem 1 (e.g. spring-operated extraction system, in-
clined extraction system, etc.)

(41) Extraction System 2/Delay (3 s):

Delay before connecting Conveyor System 2
(e.g. spring-operated extraction system, inclined
extraction system, etc.)

(42) Extraction System 2/Impulse (5 s):

Impulse for the cycle switching for Extraction Sys-
tem 2 (e.g. spring-operated extraction system, in-
clined extraction system, etc.)

(43) Extraction System 2, Pause (0 s):

Pause in the cycle switching for Extraction Sys-
tem 2
(e.g. spring-operated extraction system, inclined
extraction system, etc.)

(44)Extraction System 1/Hydraulics/Delay
(5 s):

Delay before connecting hydraulic drive for

Extraction System 1

(45) Extraction System 2/Hydraulics/Delay
(5 s):

Delay before connecting hydraulic drive for

Extraction System 2

(50) Silo filling:

Start silo filling (only possible

when the facility is not in operation and has
cooled off).

Содержание KOB PYROT SERIES
































Результаты поиска

Содержание KOB PYROT SERIES

Отзывы:

Похожие инструкции для KOB PYROT SERIES

Бренды по названию

Популярные бренды

KOB KOB PYROT SERIES, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание KOB PYROT SERIES

Отзывы:

Похожие инструкции для KOB PYROT SERIES

Бренды по названию

Популярные бренды