5.5 IP TUNNELING ADDRESS ASSIGNMENT
Figure 15.
First additional individual address (First Tunneling Address) assignment
Step 1:
Open the ETS Bus tab and select IC-IP-S.1.0 as the «Current Interface». In the «IP
Tunneling» window the already assigned host Individual Address can be read.
According to the host's Individual Address assignment the first tunneling address (additional Individual
Address) of the
IC-IP-S.1.0
can only be set by ETS.
Please make sure: The additional Individual Addresses for tunneling and the host´s Individual
Address have to be different.
Step 2:
Set the first additional Individual Address by the «Individual Address» field. Click on
the «Test» button. If the green Ok appears, the first tunneling address is set. In this
example it is «9.1.241».
page 21
module-electronic.ru
