As-delivered state
RF/TP media coupler/repeater | Order no. 5110 00 | 51103300
Page 40 of 42
10
As-delivered state
Function in delivery state
In delivery state, the device is ready for operation as a media coupler. The device
works as follows with the configurations below:
–
Physical address: 15.15.0
–
Domain address: $FF FF FF FF FF FF
–
Configuration lock: inactive
–
Repeater function during use as media coupler: deactivated
–
Configurable function of yellow status LED: deactivated
–
Filtering group telegrams (TP -> RF, RF -> TP): Filter (because no filter table
has been loaded, group telegrams are not forwarded)
–
Filtering broadcast telegrams (TP -> RF, RF -> TP): Forward unfiltered
–
Filtering physically addressed telegrams (TP -> RF, RF -> TP): Filter (TP-> RF
forwarding physical addresses of line 15.15)
–
Repetitions in case of TP transmission errors: yes
–
Telegram confirmation on TP line: only if transmitted
In the case of devices with marking "I04" or higher, the yellow status LED indicates
repeater prog. mode.
Reset delivery state (master reset)
The device can be reset to delivery state at any time, even without using the ETS.
A reset to delivery state is useful when, for example, the device was mis-
takenly commissioned with the incorrect physical address x.y.1...255, so the
repeater is active. In pure repeater operation, the device can no longer be pro-
grammed via the TP side. In this case, a reset to delivery state is helpful in al-
lowing the TP to be reprogrammed.
■
Disconnect the device connection terminals or switch off the voltage supply.
The device does not function.
■
Press and hold down the programming button.
■
Reconnect the device connection terminals or switch the voltage supply back
on.
The device restarts. The status LED briefly lights up red and then yellow. Then
the status LED flashes red slowly.
■
Release the programming button as soon as the status LED starts flashing red
slowly.
Safe-state mode is active .
■
Press and hold down the programming button again until the status LED goes
out.