KNX GIRA 5110 00 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 42

KNX GIRA 5110 00 Скачать руководство пользователя страница 32

Function | Parameters for media coupler configuration

RF/TP media coupler/repeater | Order no. 5110 00 | 51103300

Page 32 of 42

Function of yellow status LED

deactivated

flashes on telegram forwarding TP <-> RF

flashes on telegram reception at TP

flashes on telegram reception at RF (own
domain)

flashes on telegram reception at RF (all
domains)

deactivated
The yellow status function is permanently deactivated.

flashes on telegram forwarding TP <-> RF
The status LED lights up yellow briefly for each forwarded telegram.

flashes on telegram reception at TP
The status LED only lights up yellow briefly when a group telegram, broadcast tele-
gram or physically addressed telegram is received on the TP side.

flashes on telegram reception at RF (own domain)
The status LED only lights up yellow briefly when a group telegram, broadcast tele-
gram or physically addressed telegram with the domain name of the associated RF
domain is received on the RF side.

flashes on telegram reception at RF (all domains)
The status LED only lights up yellow briefly when an arbitrary group telegram, broad-
cast telegram or physically addressed telegram is received on the RF side. In this
case, telegrams of all KNX RF domains are displayed.

With the settings "flashes for telegram reception on RF (own domain)" and
"flashes for telegram reception on RF (all domains)", the status LED also
lights up yellow briefly when system broadcast telegrams are received.

«
...
30
31
32
33
34
...
»

Содержание GIRA 5110 00











































Отзывы:

Нет отзывов