DINUY S.A.
c/Auzolan 2, 20303 Irun (SPAIN
Tel.: +34 943627988 – E-mail:
Behaviour on bus voltage recovery – comm. object Brightness Switch enable
Sets the 'Brightness dependent switching'
After recovering the Bus, it can be enabled or not to consult the status of this
Behaviour on bus voltage recovery – comm. object Movement enable
Sets the ‘Movement Enable’ object behavio
After recovering the Bus, it can be enabled or not to consult the status of this object.
4 – Monitoring function
4.1 – Parameters
Activate object monitoring enable
Enable or disable this feature using an external device. Its functionality is linked to h
which triggers the movement monitor certain hours
It is possible to select the trigger telegram ('Enabling monitoring function with')
•
ON Telegram
•
OFF Telegram
Enabled Object:
Behaviour on bus voltage recovery – comm. object Monitoring enable
Sets the 'Monitoring Activation' object behavior after a power failure of the
After recovering the Bus, it can be enabled or not to consult the status of this object.
Type of monitoring object
Defines the 'Monitoring Telegram' object type, which will be sent both to detect motion, such as when elapses the time
delay:
•
Switching (EIS1): Sends an object of one bit (0, 1). Can be selected if at the beginning of the detection ('Sending at the
beginning of detection') or at the end of the detection ('Sending at the end of detection') is sent:
o
ON Telegram
o
OFF Telegram
o
Cyclic ON Telegram: ON is sent periodically
transmission’ x ‘Time Factor for cyclic transmission’.
SPAIN)
mail:
– Web:
www.dinuy.com
comm. object Brightness Switch enable
'Brightness dependent switching' object behaviour after a power failure of the Bus.
can be enabled or not to consult the status of this object.
comm. object Movement enable
object behavior after a power failure of the Bus.
can be enabled or not to consult the status of this object.
Enable or disable this feature using an external device. Its functionality is linked to higher level systems, such as a T
which triggers the movement monitor certain hours.
select the trigger telegram ('Enabling monitoring function with'):
comm. object Monitoring enable
Sets the 'Monitoring Activation' object behavior after a power failure of the Bus.
can be enabled or not to consult the status of this object.
Defines the 'Monitoring Telegram' object type, which will be sent both to detect motion, such as when elapses the time
Sends an object of one bit (0, 1). Can be selected if at the beginning of the detection ('Sending at the
beginning of detection') or at the end of the detection ('Sending at the end of detection') is sent:
ON is sent periodically. The time between two sending: ‘Time Base for cyclic
transmission’ x ‘Time Factor for cyclic transmission’.
6
igher level systems, such as a Timer,
Defines the 'Monitoring Telegram' object type, which will be sent both to detect motion, such as when elapses the time
Sends an object of one bit (0, 1). Can be selected if at the beginning of the detection ('Sending at the
beginning of detection') or at the end of the detection ('Sending at the end of detection') is sent:
: ‘Time Base for cyclic
