KNOVA KN WB-03, Быстрый старт

Страница: 2 / 8

ACCESSORIES
1
Spanner wrench
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked
with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory to the work
you intend to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer advice.
SAFETY INSTRUCTIONS
WARNING
When using this product basic safety precautions
should always be followed. Failure to follow all
instructions listed below may result in personal
injury. Read all these instructions before attempting
to operate this product and save these instructions.
1. Keep work area clear and well lit.
• Cluttered areas and benches invite injuries.
2. Make sure all moving parts are free from
interference.
3. Ensure work bench is set up on firm, level ground in a
stable manner.
4. Keep other persons away
• Do not let persons, especially children, not involved
in the work touch the tool and keep them away from
the work area.
5. Be aware of over-balancing. When a large piece is cut
from one end of a job, the remaining piece may be heavy
enough to tip the work bench. Always ensure the
workpiece is well supported.
6. Check to make sure that all fixing screws and knobs
are tight and all legs are locked into place before
operating the work bench .
7. The tool must be used only for its prescribed purpose.
Any use other than those mentioned in these instructions
will be considered a case of misuse. The manufacturer
shall not be liable for any damage or injury resulting
from such cases of misuse.
8. Never stand on this product.
9. Dress properly
• Do not wear loose clothing or jewelry, they can be
caught in moving parts.
• Non-skid footwear is recommended when working
outdoors.
• Wear protective hair covering to contain long hair.
10. Use personal protective equipment
• U se safety glasses.
• U se face or dust mask if working operations
create dust.
11. Save all warnings and instructions for future
reference. Refer to them frequently and use them to
instruct others who may use work bench . If you loan
someone work bench , loan them these instructions also
to prevent misuse of the product and possible injury.
12. Do not use tools in damp or wet locations.
Moist work piece and environment can not clamp firmly.
13. Ensure the work piece was clamped firmly and the
lock release switch is on proper state before use.
14. Check damaged parts.
Before further use of tool,
it should be carefully checked to determine that it will
operate properly and perform its intended function.
15. When not in use, tools should be stored in a dry
locked-up place, out of the reach of children and do
not allow persons unfamiliar with it.
16. Have your work bench serviced by a qualified repair
person.
17. Warning
• The use of any accessory or attachment other than one
recommended in this instruction manual may present a
risk of personal injury.
SYMBOLS
Read
the manual
Warning
Wear ear
protection
Wear eye
protection
Wear dust mask
Do not expose
to rain or water
TECHNICAL DATA
Open size .............................. 23-13/16” x 25” x 30-45/64”
Wood size .............................. 12-13/16” x 4-23/32” x 5/8”
Fold size ......................... 23-13/16” x 4-9/64” x 36-13/16”
Tubo size ................................................. 1-3/16” x 1-3/16”
Max. load .................................................................. 220.4 lb
Gross / Net weight ...................................... 12.56 / 13.44 lb
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
1. The parts need to be assembled are shown in Fig. A.
1. Wooden bench work-top 2 pcs
2. Vise clamp assembly 2 pcs
3. Toolrack crossbars 2 pcs
4. Non-skid rubber feet 4 pcs
5. Bench support leg 2 pcs
6. Removable foot pads 4 pcs
Attachment Spec Quantity
Phillips head bolts M8x45 4 pcs
Hex head bolts M6x37 8 pcs
Wood screws 4.8x16mm 16 pcs
Small nuts M6 8 pcs
Large nuts M8 4 pcs
Washer (Flat) ø8 / ø6 8 pcs / 8 pcs
Wrench 10-13mm 1 pc
Scrswdrivar Philips (Not supplied)