KNOVA KN WB-03, Быстрый старт

Страница: 3 / 8

2
OPERATING INSTRUCTIONS
1. Using a Phillips scrswdriver, secure the 2 visa clamp
assemblies to the undersides of the 2 worktops, with
the 16 wood screws Make sure the inch scale and
protractor face the same direction as the handles on
the vise clamp assemblies (See Fig B).
2. Connect the tool rack crossbars to tha support legs,
making sure the long sides of the tool bars are facing
outward on the support leg units, and the lndentions and
small folding crossbars on the support leg units are also
facing outward. Use a Phillips screwdriver, the wrench
provided, the 8 phillips head screws, 8 (small) nuts and
8 (flat) washers (see Fig.C).
3. Connect the leg and tool bar assembly to the vise and
table tops assembly, making sure the handles of
the vices are facing the same direction as name plate on
tool rack crossbar, Usa the wrench provided and
the Phillips head screwdrlver, the 4 large hex head bolts,
4 nuts, and 4 larger (flat) washers (see Fig, D).
4. Attach the non-skid rubber feet (See Fig. E)
Attach the non-skid rubber feet (4) onto the bottoms
of legs. The longest edge of the feet lit on the outside
corner of the lags.(See Fig. E)
USING INSTRUCTIONS
1. Insert the adjustable clamp pads into the desired
work-top holes, based on the size and shape of object
to be held in place (See Fig.F).
2. Put the workpiece on the bench top and turn the vice
clamps to tighten until the clamp pads are holding the
workpiece sacuraly.
3. Use the rulers and protractor for measurements as
desired.
4. Proceed with drilling, sawing or cutting operations.
5. Use the tool racks on crossbars to keep various tools
such as wrenchas, scrawdrivars, scissors, and other
tools at hand and ready to use (See Fig.G).
HINTS FOR YOUR WORKTABLE
NEVER use this workbench as a ladder, and never stand on
top of workbench. Do not exceed the 250 lb (112.5kg). load
limit. Always use the workbench on a solid and level surface.
Your workbench is designed to fold up for storage when not
in use. To fold up, pull up on both outer folding supports.
As the supports are pulled up, the tabla will fold with one
tablotop side above the other for compact storage (see Figs.
H and I).
MAINTENANCE
Your tool requires no additional lubrication or maintenance.
Always store your tool in a dry place.
COMPONENT
1 Woodenbench
work-top
2 Vise assembly
3 Tool rack
* Not all the accessories illustrated or described
are included in standard delivery.
1
6
2
3
4
5
4 Non-skid rubber feet
5 Bench support leg
6 Removable ABS
clamp pads
VISUAL ASSEMBLY GUIDE
6
4
2
1
3
5
A
B