KNOVA KN AP-130A, Инструкция по эксплуатации

Страница: 6 / 20

5
ACCESSORIES AND ATTACHMENTS
RECOMMENDED ACCESSORIES
To avoid injury:
• Use only accessories recommended for this machine.
• Follow instructions that accompany accessories. Use of
improper accessories may cause hazards.
• Use only accessories designed for this machine to avoid
injury from thrown broken parts or workpieces.
• Do not use any accessory unless you have completely read
the instruction or operator’s manual for that accessory.
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
Carefully unpack the machine and all its parts.
WARNING • To avoid injury from unexpected starting,
do not plug the power cord into a power source
receptacle during unpacking and assembly. This cord must
remain unplugged whenever you are assembling or
adjusting the machine.
• If any part is missing or damaged, do not plug the machine
until the missing or damaged part is replaced, and
assembly is complete.
TABLE OF LOOSE PARTS
Unpack carton; check you machine
to see parts listed below:
1. Thickness planer x 1
2. Dust chute x 1
3. Thumb screw x 2
4. Magnet x 2
5. Adapter x 1
6. Crank handle x 1
7. Socket head bolt x 1
8. Flat washer x 1
9. hex wrench x 1
1
2
3
4
5
9
7
8
6
ASSEMBLY
WARNING Do not connect to power supply until
assembly is complete.Failure to comply could result in
accidental starting and possible serious personal injury
• Place the washer over the socket head
bolt and feed the bolt into the handle.
Tighten the bolt to secure the handle
in position. Place the handle cap onto
the handle.
• Lower the in-feed and out-feed tables.