background image

IMPORTANT

Please read these instructions carefully, note the safety instructions warnings, use the 

product correctly and with care for the purpose for which it is  intended, failure to do so 

may cause damage to property and/or serious personal injury, please keep this 

instruction manual safe for future use.

1. SAFETY INSTRUCTIONS AND WARNINGS

1.1   The maximum ram capacity is 10 ton.

  

DO NOT exceed this rated capacity.

1.2 When extension tubes are used, the

  

rated capacity is always reduced by

  

50% for each tube connected.

1.3 The maximum spreader capacity

  

is 0.5 ton. And maximum ram toe and

  

plunger toe capacity or 0.8 ton. DO

  

NOT exceed these rated capacities

  

when using these attachments.

1.4 Do not use this equipment as a

 

vehicle lifting device or as a vehicle

  

support.

1.5 Keep children and other

 

unauthorized persons away from

  

work area.

1.6 Remove loose clothing. Remove ties,

  

watches, rings and other jewelry, and 

 

contain long hair.

1.7 Always wear ANSI approved safety

  

goggles when operating the repair

  

kit.

1.8 Keep proper balance and footing. do

  

not overreach and wear nonslip

 footwear.
1.9 Only use this equipment on a surface

  

that is stable. Level, dry and not

 

slippery, and capable of sustaining

  

the load. Keep the surface clean,

  

tidy and free from unrelated

 

materials and ensure that there is

  

adequate lighting.

1.10 DO NOT allow the piston rod (R03)

  

of ram to extend so far as to exceed

  

the maximum ram stroke.

1.11 When coupler valves are

 

disconnected, always use dust cap to

  

keep the hydraulic system clean.

1.12 DO NOT drop any heavy objects

  

onto the hose and DO NOT twist the

  

hose. Always keep the hose clean to

   

avoid damage to the hose and

 couplers.
1.13 Keep the equipment away from

  

heat or fire, as this may cause

 

damage or weaken the seals.

1.14 DO NOT operate this equipment

  

when you are tired and under the

  

influence of alcohol, drugs or any

  

intoxicating medication.

1.15 DO NOT allow untrained persons

  

to operate the equipment and DO

  

NOT make any modifications to it.

1.16 DO NOT expose the equipment to

  

rain or any other kind of bad

 weather.
1.17 Use a qualified person to maintain

  

the equipment in good condition.

  

Keep it clean for best and safest

  

performance.

1.18 If the equipment need repairing

 

and/or there are any parts that

  

need to be replaced, have it repaired

  

by authorized technicians and only

  

use the replacement parts supplied

  

by the manufacturer.

1.19 WARNING: The warnings, cautions,

  

instructions discussed in the

 

instruction manual can’t cover all

  

possible conditions and situation

  

may occur. It must be understand

  

by the operator that common sense

  

and caution are factors which can’t

  

be built in this product, but must be

  

supplied by the operator.

2. SPECIFICATIONS

Capacity: 

10 Ton.

Pump output pressure:

63 MPa (9,137 psi)

Ram min. height: 

12-11/16”

Ram max. height: 

17-51/64”

Portable hidraulic equipment 10 Ton.

KN 7402-10PA

Piston stroke:

5-1/8”

Oil being filled:

800 ml.

Net weight:

68.3 lb.

Gross weight:

70.98 lb.

Содержание KN 7402-10PA













Отзывы: