Connecting Video Equipment
You can connect a document camera, VCR, laser disc player, and DVD player, etc.
Connecting to the VIDEO IN VIDEO/S-VIDEO JACKS
You can connect up to two pieces of
video equipment to the VIDEO IN
jacks following the illustration
below. Two types of connections
can be made. Connect either using
the cables indicated in dotted lines
or those in gray as shown in the
drawing below.
•
You can switch the input source
(picture) to VIDEO or S-VIDEO
even if you connect more than
one piece of equipment. S-
VIDEO connection provides
more vivid color and higher
resolution compared to VIDEO
connection.
•
You can output the sound of one
component through the unit
speaker even when two
components are connected.
Before connecting
•
Turn off the components that are
to be connected.
•
The unit and computer will be
turned on in "Using the
Projector" on page 13. Do not
turn on either the computer or
unit until you read this section.
•
Please also refer to the manual of
the video component to be
connected.
9
