Knight 100 Series, Руководство по обслуживанию

Страница: 19 / 52

1
Service
(continued)
Parameter table
Menu Description User Access
Installer
Access
Boiler Pump Delta T Set Point No Yes
Boiler Pump Minimum Volts No Yes
Boiler Pump Maximum Volts No Yes
Boiler Pump Standby Volt No Yes
Boiler Pump Type No Yes
Service Notification Months No Yes
Service Notification Running Time No Yes
Service Notification Cycles No Yes
Reset Service Reminder No Yes
Installer Name No Yes
Installer Phone Number No Yes
Aux Input Name No Yes
Time & Date No Yes
IF Outdoor Sensor Connected:
i. Low Outdoor Temperature 1
ii. High Outdoor Temperature 1
iii. SH1 Set Point at Low Outdoor Temperature
iv. SH1 Set Point at High Outdoor Temperature
v. Outdoor Air Shutdown SH1
vi. Outdoor Air Shutdown Differential SH1
No Yes
Cascade Address = 0
i. Maximum Cascade Set Point
ii. Cascade Offset
iii. Cascade Differential
iv. Cascade Type
No Yes
BMS (ACTIVE)
i. BMS Type = POWER
1. Rate at Minimum Volts
2. Rate at Maximum Volts
ii. BMS Type = SETPOINT
1. Set Point at Minimum Volts
2. Set Point at Maximum Volts
iii. Volts at Minimum
iv. Volts at Maximum
v. BMS Thermostat Input = INACTIVE
1. On Volts
2. Off Differential Volts
No Yes
Access or Create “Lochinvar” Folder
i. Save Parameters from the Control
ii. Load Parameters to the Control
No Yes
CIRCULATION
SERVICE
BASIC SETUP
NOTIFICATION
Service Manual
Table 1-4 SMART SYSTEM control module parameters
Note: Parameter selections in BOLD are included in the Smart Setup Wizard.
19
(PAG
ES
29
-
30)
(PAG
ES
30
-
31)
PUMPS CON
T’D
LOCH-N
-LINK
(PAGE 3
1)
(PAGE
31)