Diaphragm Pump NMS 030
Operation
KNF Micro BA306116-306115 NMS030-EN 0221
Operating and Installation Instructions
11
Duty cycle / impulse operation
KNF pumps are designed for continuous operation.
Short start and stop cycles may adversely affect the service life of
the brushed motors
If the pump is operated with short cycles in your application,
please contact a KNF pump specialist for further information
(Telephone number: see first page)
Turning the pump on
In order to guarantee that the pump can start every time it is
advisable to reduce the back pressure to an acceptable level.
This is also the case if there is a short power cut.
For more specific information contact the KNF specialist
Turning the pump off
Ensure that the system is subject to normal atmospheric pressure
(release the hydraulic pressure.
Impulse operation