KNF N 813.3 AN.29DC-B, Перевод оригинальных инструкций по эксплуатации и установке

Страница: 12 / 40

Technical data Diaphragm Vacuum Pumps N 813
12 Translation of original Operating and Installation Instructions, english, KNF 121240-121506 09/19
Pump materials
Pump head Aluminium
Diaphragm EPDM
Valve EPDM
Tab. 7 (part 2)
The pump is protected against overheating by a temperature
sensor on the motor board and equipped with overcurrent
protection.
If one of these safety functions is triggered or if the maximum
blocking time of the rotor is exceeded due to a fault, the pump
will be shut down and must be manually reset, as follows:
➔
Separate pump from the mains.
➔
Remove the cause(s) of the fault before restarting.