Stored Program Limits
The K’NEX Robotics Control Box has 2Mb of user program storage space.
• Ten programs can be stored in the Control Box.
• The maximum size of any single program is 64K (approximately
6500 symbols or steps!).
• Within each program there can be a maximum of 16 threads (starts)
and an unlimited number of sub-procedures (with up to 14 nesting levels).
• Each program can use up to 64 variables.
• Each program can use an unlimited number of sound samples (up to
a maximum combined duration of 30s).
• Each program can use up to 32 images.
Technical Specifications
• USB V 1.1, V2.0 & V3.0 full speed compatible.
• Power supply, Output 7.5V, 2 A, regulated dc with a positive center and negative
outer pin.
• 6 sensor inputs.
• 4 motor outputs.
• 2 digital outputs.
• 1 speaker.
• 1 microphone.
• Suitable for use in a 32-104 degrees F (0-40C) operating range and 0-95% relative
humidity (non-condensing).
Please note:
• The Control Box does not contain user serviceable parts.
• Using the Control Box in a way that is outside its normal operation (as described
in this manual) may impair the unit’s (warranty) protection and ability to function
correctly.
Education
®
Building Programs
education.com
Education
®
Building Programs
14
K’NEX Robotics User’s Guide
HARDWARE
