39
7.2.6 Set the knife at the center of the disc
Adjust the knife with the hand wheel (7-18/1) in
such a way that the knife edge passes through the
center of the rear grinding wheel.
Check sharpness when the program ends
(“Start / Stop” button no longer flashes).
If the knife is not yet sharp, mark the blade on
both sides with a pencil and grind again.
The marked places indicate whether the knife has
been completely ground or not. If not, adjust the
grinding angle to make it steeper
7. Operation
Figure 7-18
Set knife
Figure 7-19
Right
Figure 7-20
Wrong
1
