1
3
4
2
30
ATTENTION
Use the grinding program that matches the
knife. An incorrect grinding program can
damage the machine and knife.
The selected grinding program appears on the
main screen in the “Filename” line (7-3/1).
Check the abrasives used (7-3/3) and (7-2/4) and
change as necessary.
The images and data must match the abrasives
used.
NOTICE
The name of the grinding wheel matching
the grinding program appears on the main
screen under “Holder” (7-3/2). This name is
engraved on the cam disc.
The appropriate abrasive must be used for
each knife and grinding program.
7.2.2 Mount cam disc SP 116
Open the safety doors.
Mount the Z coupling on cam disc SP 116 as
described and tighten using combination wrench
SW19. Here, care should be taken to note the
relevant marking on the Z coupling and the base
plate.
7. Operation
Figure 7-3
Main screen
Figure 7-4
Mount Z coupling
