Knauer SmartMix, Инструкция по эксплуатации

Страница: 17 / 22

SmartMix Instructions V5350
Maintenance and care 13
Steps Figure
Replacing the
filter system
1. Remove the filter system
1
in
the mixer lid
2
with a pair of
pointed tweezers.
Internal view
1
2
Fig. 7: Remove the filter system
from the mixer lid
Note: Observe the sequence when inserting the new filter inserts!
Otherwise, the fil ters will plug up.
2. Insert the new fil ter system
at position
1
in the following
order:
— 1 unit filter sie ves 7 µm
3
— 1 unit glass-fiber filter
4
— 1 unit filter sie ves 3 µm
5
Sequence filter inserts
from top to bottom
Fig. 8:
3
4
5
Insert new filter system
in the mixer lid
Note: Put on the mixer lid with the
screw fittings of the capil laries
6
as
shown in the picture.
6
3. Put the mixer lid with the replaced filter system onto
the mixer housing with the cartridge and the PEEK sealing ring.
4. Screw tight the four hexagon screws on the mixer lid
with the Allen wrench.