26
Changing the heat/cool element
AZURA® CT 2.1 Service Instructions VSM-020
Process
Figure
6.
Ensure that the black bar
which is visible behind the
fan blades is located in the
upper left corner before
mounting it .
Fig. 36:
Black bar behind the
fan blades
7.
The cable of the temperature
sensor must be placed
between the cooling fins
right side from the middle.
Fig. 37
Position of the temperature
sensor cable
8.
Mount the fan onto the fan
plate. Tilt the fan plate slightly
to one side and place it over
the heat/cool element.
9.
Keep a distance of at least
83 mm from the bottom edge
of the fan plate to the bottom
of the device.
10.
Fasten the screws of the fan
plate.
Fig. 38:
Installed fan plate
