20
Changing the heat/cool element
AZURA® CT 2.1 Service Instructions VSM-020
Process
Figure
2.
Remove the plug-in
connector for the tempe-
rature sensor
1
, the fan
2
and the leak sensor
3
.
3.
Loosen the black and the red
cable at the lower part of the
mainboard.
4.
Loosen the blue and the red
cable on the left side of the
mainboard.
Fig. 22:
Loosen the cables and
plug-in connectors on
the mainboard
5.
Loosen 3 cable ties which
bundle the cables.
6.
Loosen the cable support
4
as well and put it to the
side for later use.
Fig. 23
Loosen the cable ties and
the cable support
7.
Loosen the green grounding
cable
5
from the rear plate.
Fig. 24
Loosen the green grounding
cable
The rear plate has been removed completely.
Remove the side panels of the device.
3
2
1
4
5
Result
Next step
