Calibrating CT 2.1 manually 11
AZURA® CT 2.1 Service Instructions VSM-020
Procedure
Figure
3.
Enter the average values of
the temperature measure-
ments acquired as described
in chapter 4.1 and press
“recalculate” button.
Note:
If the heat/cool
element has been changed as
described in chapter 7, please
press “Set Defaults” before you
enter new temperature values.
Fig. 6
Enter averaged temperature values
4.
Correction values will be
calculated automatically
and will appear under Temp
Correction.
Fig. 7
Calculated correction values