KNAPE & VOGT LIMITED LIFETIME WARRANTY FOR COMMERCIAL PRODUCTS - USA
This warranty is given to the initial purchaser of new commercial products purchased from Knape & Vogt and its subsidiaries. The warranty covers defects in materials and
workmanship. The warranty does not apply to defects resulting from misuse, damage or abuse, normal wear and tear, accident, modification, improper installation or maintenance,
third party materials or damage during shipping. The warranty is not transferable and does not cover any subsequent purchasers of the products. During the Limited Lifetime Warranty
period, Knape & Vogt, will, at its option, repair or replace any defective product with a comparable product or component. This Limited Warranty is for repair or replacement of defective
products only and does not cover any other costs such as removal, installation, or other related expenses. For warranty service, please contact Knape & Vogt, 2700 Oak Industrial
Drive, Grand Rapids, MI 49505, Attention: Customer Service. Information regarding the claimed defect and date of purchase of the product must be provided. Any defective product
must be returned postage or freight prepaid to Knape & Vogt. THIS LIMITED WARRANTY CONSTITUTES THE ONLY WARRANTY FOR THE PRODUCTS AND ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY DISCLAIMED. THIS LIMITED WARRANTY CONSTITUTES THE SOLE REMEDY AVAILABLE WITH REGARD TO ANY DEFECTIVE
PRODUCTS. KNAPE & VOGT SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOSS OF TIME,
INCONVENIENCE, OR LOST REVENUES OR PROFITS.
Copyright © 2006 Knape & Vogt, all rights reserved. Standard KV Commercial Warranty (Rev No.2, 9/23/05)
© 2013 Knape & Vogt Manufacturer reserves the right to change specifications without notice and without incurring responsibility for existing units. US Patent 8,430,567
2700 Oak Industrial Drive NE Grand Rapids, MI 49505
800.253.1561 • 616.459.3311 • fax 616.459.3290 www.kv.com
DRAWER DIMENSIONS
FOR FACE FRAME AND FRAMELESS APPLICATIONS
Drawer Notch & Bore
Rear Bracket
1/4” x 3/8” DEEP [6mm x 10mm DEEP]
9/32” [7mm]
1/2” Max.
[12.7mm]
1-5/16” Min.
[33mm]
7/16”
[11mm]
Drawer Thickness
Deduct from Opening Width
3/4” [19mm]
15/32” [12mm]
11/16” [17.5mm]
19/32” [15mm]
15/8” [16mm]
23/32” [18mm]
Drawer Width Calculation
310150/1113
4
13/16
"
[21mm]
1-1/4
"
[32mm]
5/8
"
[16mm]
5/8
"
[16mm]
13/16
"
[21mm]
1-1/4"
[32mm]
5/8"
[16mm]
5/8"
[16mm]
13/16"
[21mm]
MUV-RBP
MUV-RBM
Full Extension Soft-Close Undermount Drawer Slide
34
Cabinet Opening Width
CRITICAL
*
Inside Drawer Width
CRITICAL
Max. Drawer Bottom Recess:
1/2" [12.7mm]
Min. Top Opening Clearance:
1/4" [6.3mm]
Min. Bottom
Opening Clearance:
9/16" [14mm]
*Cabinet Opening Width Minus 1-31/32" [50mm] = Inside Drawer Width
MuV34 maximum side material thickness: 3/4" [19mm]
Use MuV34 for Drawer Material from 1/2" [13mm] to 5/8" [16mm]