background image

 

 

THIS INSTRUCTION BOOKLET CONTAINS 

IMPORTANT

 SAFETY INFORMATION.  

PLEASE READ AND KEEP FOR FUTURE REFERENCE. 

Whalen Furniture Mfg. Inc.  

 

 

   Page 1 

 

    

   Factory No. 33-10944 

                       

 

 

3-in-1 TV Stand (WMCXL-3) 

U.S. Patents 8,079,311 & 8,191,485 

 

This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your 
needs. DO NOT discard any of the hardware or parts that you will not use on your chosen option. 
This will allow you to use this TV Console in different configurations at a later date, if desired. 

 
 
 
 
 
 
 

 
 

 

 
                                           

 

 

 

 

 
 
 

 
 

 
 

ADULT ASSEMBLY REQUIRED 

 

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to 
the store where it was purchased. Please call our toll free customer service number and have your 
instructions and parts list ready to provide the model name, part name or factory number:  

 

1-866-942-5362        8:30 a.m. - 4:30 p.m. PST, Monday - Friday 

ONLINE:  

www.whalenstyle.com

      

       EMAIL: 

[email protected]

 

 

 

Video Instruction Guides  

Go to 

http://whalen.showuhow.com

 to view step-by-step instructional 

videos for assembling and installing your product. Enter the following 
product number on the ShowUhow homepage.

 

 
 
 

WMCXL-3

LOT NUMBER:        

 

DATE PURCHASED:      /     / 

Summary of Contents for WMCXL-3
























Reviews: