9
from the power supply by unplugging
the power cord from the outlet when
cleaning the refrigerated island or
when servicing the refrigerated is
-
land. During the entire cleaning and
maintenance process, it must be
ensured that the refrigerated island is
disconnected from the power supply.
The operator must be able to check
whether the mains plug is outside the
socket during the entire cleaning or
maintenance process.
•
If you discover or suspect malfuncti
-
ons or damage to the temperature
controller that endanger safe opera
-
tion, take the refrigerated island out
of operation immediately.
•
Only allow repair and maintenance
work or adjustments at the tempe
-
rature controller only by authorized
specialists. To do this, contact KMW
customer service.
Safety instruction for the authorized spe-
zialist
Only parts that correspond to the original
device data may be used for repairs.
•
This refrigerated island contains elec
-
trical and mechanical parts that are
essential to protect against sources of
danger.
•
Do not operate the refrigerated island
with an external timer or a separate
telecontrol system.
•
Incorrect installation of the tempera
-
ture controller installed in the refrige
-
rated island can lead to an electric
shock. The temperature controller is
installed and adjusted at the factory.
•
Do not manipulate or change the
temperature controller and never
open the housing.
•
Make sure that the entire system is
switched off when the temperature
controller is mounted, wired or dis
-
mantled.
•
Please note that main voltage and/
or external voltage may be present
when the control voltage is switched
off.
•
Use suitable professional tools for all
work.
•
Check all wiring after the temperatu
-
re controller installation is complete.
•
Observe the information on the ma
-
ximum load for all connections (see
chapter „Technical Data“ for the
temperature controller).
•
Keep any liquids (e.g. condensed wa
-
ter, cleaning agents, etc.) away from
the temperature controller.
