16
panes and the inner baffle pane.
•
A defrosting channel is located below
the floor display in the cold room. The
defrost channel is used to drain con
-
densed water.
Condensation occurs during proper operation
of the refrigerated island; the moisture contai
-
ned in the air freezes on the cooling surfaces.
For the correspondingly necessary defrosting
process, the cooling island has an automatic
defrosting system, with the help of which the
refrigerated island defrosts at regular intervals
automatically. It is not necessary to defrost the
refrigerated island manually usually.
To do this, observe the procedure in the “Clea
-
ning and maintenance” chapter.
Temperature controller / Refrigeration
controlle
r
With the help of the temperature cont
-
roller, the temperature in the goods area
is regulated to an adjustable setpoint.
The temperature controller is set electro
-
nically. All necessary settings for tempe
-
rature control and automatic defrosting
are preset at the factory. Changes to
the setting may only be made by autho
-
rized specialist personnel. Failure to do so
may result in damage to the goods.
The refrigeration controller installed in the
refrigeration island is the Modell CRDP-XP
or alternative model
CRA from Wurm GmbH & Co. KG Elektro
-
nische Systeme, Morsbachtalstraße 30,
D-42857 Remscheid,
