background image

Temperature 

class

M1 (-1°C bis +5°C)

M2 (-1°C bis +7°C)

Climate class

III (25°C; 60% rF)

Supply voltage

230V; 50Hz

Power con

-

sumption

246W

Power con

-

sumption at 

temperature 

class M1/24h

KIM1GXT100H100AL108 

1,92 kWh

KIM2GXT100H100AL108

1,81 kWh

KIM1GXT00H100AL140 

2,1kWh

KIM2GXT100H100AL140 

1,6 kWh

KIM1GXT100H100AL200 

2,55 kWh

Protection art

IP44

Protection class

1

Refrigerant 

R290

Capacity 

0,15kg

 

17

Troubleshooting and Service

Electric shock and risk of ignition!

If work is carried out improperly on the 

electrical system or on the refrigeration 

system improperly: there is considerable 

potential for danger.

• 

Only have work on the electrical system 

and the refrigeration system carried out 

by authorized KMW customer service. 

• 

Never allow untrained or unauthorized 

persons to work on the electrical system 

or the refrigeration system.

In the case of a fault, check the following 

points:
• 

Is the power cord plugged in properly?

• 

Is there voltage at the socket?

• 

Is the display active on devices with an 

electronic temperature controller?

If the temperature in the refrigerator com

-

partment is too high, check the following 

points:
• 

are the goods stored were too warm 

stored in accidentally?

• 

Did you have a longer power outage 

previously?

Contact KMW customer service if the fault 

is not due to any of the causes listed here. 

When contacting KMW Customer Service, 

always give the serial number of the

refrigerated island and the type of fault or 

a description of the malfunction. Contact 

KMW customer service if loud noises and/

or strong vibrations occur on the device in 

any case.

Contact for service queries (e.g. with re

-

gard to maintenance and service, repairs, 

etc.) in principle to your regionally respon

-

sible KMW customer service.

If you do not know the customer service 

responsible for your region, you can con

-

tact the central KMW customer service 

alternatively at the following address:

Contact address:

KMW Kühlmöbelwerk Limburg GmbH

Limburger Strasse 80

D- 65555 Limburg

Telefon 06431 599 0

Service 0800 59 95 95 9

E-Mail: [email protected]

Service: [email protected]

Internet: 

www.kmw-limburg.com

Technical data

Year of Manu

-

factoring

since 2022

Содержание KIM 108 Series





















Отзывы: