KMD-5575
8
Installation and Operation Guide
Indicators and Operation
Accessories
Specifications
Connectors and Fuses
902-602-04
Replacement three-pin removable terminal block
031-602-02
Replacement four-pin removable terminal block
HPO-0063
Replacement two-pin jumper
Enclosures
HCO-1102
Steel control enclosure, 10.1 x 2.4 x 7.1 inches
HCO-1034
Energy management equipment enclosure 16 x 18 x 6"
HCO-1035
Energy management equipment enclosure 20 x 24 x 6"
HCO-1036
Energy management equipment enclosure 24 x 36 x 6"
NOTE: For smoke control applications, the controller must be mounted in a UL
Listed FSCS enclosure or listed enclosure with minimum dimensions.
See Smoke Control Manuals 000-035-08 (BACnet) and/or 000-035-09
(KMDigital) for smoke control application information.
Power Transformers
XEE-6111-40
Transformer, 120-to-24 VAC, 40 VA, single-hub
XEE-6112-40
Transformer, 120-to-24 VAC, 40 VA, dual-hub
XEE-6112-100
Transformer, 120-to-24 VAC, 96 VA, dual-hub (required in
smoke control applications)
Supply Voltage
24 volts AC (–15%, +20%), 60 Hz, 3 VA, Class 2 only
NOTE: All circuits, including supply voltage, are power limited. AC power is
non-supervised in smoke control applications.
Baud Rate
9,600 to 38,400
Connections
Removable screw terminal blocks, wire size 14–22 AWG
Network Wiring
Belden 82760 or equivalent, shielded, twisted, 18 AWG,
5.5 ohms per 1,000 feet and
≤
51 pF/foot (network
connections are supervised in smoke control applications)
Material
Black ABS
Size
5.31 x 3.38 inches (134.9 x 85.8 mm)
Weight
2.5 oz. (71 grams)
Regulatory
UL 916 Energy Management Equipment listed; UL 864
Smoke Control Equipment listed (UUKL)—see Smoke
Control Manuals 000-035-08 (BACnet) and/or 000-035-09
(KMDigital) for smoke control application information
Ambient Limits
Operating
32 to 120° F (0 to 49° C)
Shipping
–40 to 140° F (–40 to 60° C)
Humidity
0 to 95% RH, non-condensing
The module will power up when 24 VAC is applied. No power switches are used
with this device. Once connected and powered up, the module operates automati
-
cally and requires no user intervention.
Two Status LEDs flash to indicate communications activity on the corresponding
network. The
upper LED
monitors Network 1 connected to the
lower bank
, and
the
lower LED
monitors Network 2 connected to the
upper bank
.
