KMC Controls
8
Operation
The following sections describe the controls and indicators found on
the NetSensor.
Display
The display contains four 0.38-inch, seven-segment LCD
digits that are visible across a normal size office. The display provides
time, temperature, and humidity readouts.
Controls
These NetSensors include nine push buttons. Buttons 5
through (virtual) 8 are user programmable and can be reassigned.
(Button “8” comes from simultaneously pressing Buttons 5 and 7.)
The actual operation of the programmable buttons depends upon the
programming in the controller to which the NetSensor is connected.
See
. The display reverts back to the default
room temperature display about ten seconds after the last button
press.
The up and down arrow buttons adjust programmed values (where
applicable) as follows:
1. Press the button for the desired function.
2. Adjust the value up or down.
Maintainence
Remove dust as necessary from holes in top and bottom. Clean the
display with soft, damp cloth and mild soap.
