NetSensor Installation and Operation
15
The ALARM button and feature distinguishes the KMD-1183 from
the KMD-1185. See the table below.
Humidity
Pushing Button 7 makes the top primary display
temporarily show the relative humidity instead of room temperature.
The smaller relative humidity display shows the humidity
continuously.
Day of Week
This function allows you to set the day of the week.
Press Buttons 5 and 7 together to access.
◆
In WinControl (only), check
Allow DOW (Day Of Week) Range
at
the bottom of the NetSensor dialog.
◆
Set
Type
to
Analog.
◆
Set
Range
to
DOW
.
◆
Under
Description
enter the name, description, or mnemonic of
the variable that will store the day of week value.
Table 3-3 Alarm functions
State
KMD-1183
KMD-1185
Alarm
Displays room
temperature. When
Button 6 is pressed,
“
ON
” is momentarily
displayed.
Displays flashing “
ALM
”
(alternates with room
temperature display). Pressing
Button 6 suppresses “ALM”
indication for 10 minutes, and if
Button 6 is pressed again during
the 10 minute suppression
period, "ALM" shows
momentarily. When “ALM” is
flashing, if any button other
than 6 is pressed, the display
momentarily returns to the
normal display corresponding
to that button.
No Alarm
(Normal)
Displays room temperature. When Button 6 is pressed,
“
OFF
” is momentarily displayed.
