Klugmann KSO6612.5ICX, Инструкция по эксплуатации

Страница: 19 / 56

19
OPERATION
Touch +/- soft keys or use the slider bar to set
the required Duration. Touch OK to confirm
the Duration setting. The Duration setting
screen will close. The icon will be shown
in the upper corner on the notification bat.
The appliance will show time countdown
and the animated red progress bar below
End Time.
Once the Duration has elapsed, an acoustic
signal is sounded (2 beeps / pause / 2 beeps)
and the display backlight is flashing. The
sequence is repeated every 3 seconds. The
icon is flashing as well. The maximum
duration of an acoustic signal is 5 minutes.
Touch OK or any place on the screen to
acknowledge and mute the acoustic signal.
Afterwards the appliance will display the
inactive Duration screen. If you do not start
the programme again within 60 seconds, the
appliance will display the current time.
Set Duration and End Time (for a heating
function)
A) Set the Duration.
For more details on how to Set the Duration,
please prefer to the Set the Duration (for the
heating function) section.
B) Set the End Time.
To set the End Time, Duration must be set on
the Duration setting screen. The symbol
will be displayed.
Touch to edit End Time. The symbol
will flash. If the user takes no action within
10 seconds, the selected heating function
screen will be displayed with the previously
set Duration
Touch again while is still flashing. You
will now be able to set End Time. The sym-
bol stops flashing and the symbol starts
to flash. If the user takes no action within
10 seconds, the selected heating function
screen will be displayed with the previously
set Duration
Touch +/- soft keys or use the slider bar to
set the required End Time. Touch to con-
firm the End Time setting. The End Time
setting screen will close. Current time will
be shown.
The and symbols will be shown in the
upper right corner and the time remaining
to start is shown on the animated progress
bar.
This is show on the on the animated progress
bar below the time.
If the user takes no action within 60 seconds,
the appliance will display the current time (the
settings are retained). On the current time
screen, the End Time and Duration
icons are shown on the notification bar. Both
icon flash until the oven programme is started.
When you touch the screen anywhere the ap-
pliance will display the last edited settings.