klover SMART 120, Руководство пользователя

Страница: 47 / 60

47
Summary:
CASE
REMOTE CONTROL
ROOM SENSOR
ROOM THERMOSTAT
CONTACT
ACTION
1 OFF OFF It works with room thermostat contact
2 OFF ON It works with room thermostat contact
3 ON OFF
It works with remote control room sensor
only
4 ON ON
It works with remote control room sensor
and room thermostat contact
5. Menu 05
– 3-Way Valve Threshold
It allows setting the temperature threshold for switching the 3-way motorised valve installed in the
DHW system. Change-over occurs after 30" from reaching the set temperature and with a
hysteresis of 2°C.
Example:
3-Way Valve Threshold = 55°C
The valve opens after 30" from reaching 55°C.
The valve closes if 52°C is reached.
6. Menu 06
– Sound alarm
It allows enabling or disabling the sound signal in case of alarm. The sound signal is only available
on the central heating cooker board, and not on the external remote control.
7. Menu 07
– Initial load
It allows pre-loading pellets
for 90” with the central heating cooker off and cold. Start the operation
using key 1 and stop it using key 4. It can be useful if the central heating cooker is ignited after fully
emptying the tank, or it is the first time it is filled.
8. Menu 08
– Cooker state
It allows displaying the instantaneous central heating cooker state showing the state of the various
devices connected to it. There are several pages displayed in succession. As the reported data is
reserved for the Technical Assistance Centre, we recommend not accessing this menu.
9. Menu 09
– Technical calibration
It gives access to all that is reserved for the Technical Assistance Centre. Access is protected by an
access key. Unauthorised access can cause serious damage to the equipment and the environment
as well as personal injuries.