klover DIVA SLIM, Установка, использование, техническое обслуживание и полезные советы

Страница: 44 / 52

DIVA SLIM AIR PELLET STOVE
42
EN - Rev. 1.0
Parameter tables DIVA SLIM MULTI-AIR
“CLEANER SETTINGS” parameters - Model DSC (L15_181119)
Parameter Menu level Description Display Measurement Value field
Database
P2
Pr51 M10 – 01 – 01 ON time for brazier cleaning gear motor CLEANING TIME Seconds 0 – 120” 13
Pr52 M10 – 01 – 02 Time from switching off after which the brazier cleaning cycle starts CLEANER DELAY Minutes 1 – 15 6
Pr53 M10 – 01 – 03 Time from switching on after which the brazier cleaning cycle starts CLEANER STAND-BY Hours 1 – 24 9
“DUCTING SETTINGS” parameters - Model DSC (L15_181119)
Parameter Menu level Description Display Measurement Value field
Database
P2
Pr55 M10 – 03 – 01 Enables ducting operation ENABLE DUCT. Off / Mode
Off
S1 – S2 – S1+2
T1 – T2 – T1+2
A1 – A2 – A1+2
A1
Pr56 M10 – 03 – 02 Allows for choosing whether the ducted air fans can be switched “OFF”. DUCTED OFF On – Off On – Off Off
Pr57 M10 – 03 – 03 Heat exchanger 2 (ducting 1) in power 1 work phase DUCT.1 SPEED-S1 Volt 65 – 225 165
Pr58 M10 – 03 – 04 Heat exchanger 2 (ducting 1) speed in power 2 work phase DUCT.1 SPEED-S2 Volt 65 – 225 175
Pr59 M10 – 03 – 05 Heat exchanger 2 (ducting 1) in power 3 work phase DUCT.1 SPEED-S3 Volt 65 – 225 190
Pr60 M10 – 03 – 06 Heat exchanger 2 (ducting 1) in power 4 work phase DUCT.1 SPEED-S4 Volt 65 – 225 220
Pr61 M10 – 03 – 07 Heat exchanger 2 (ducting 1) in power 5 work phase DUCT.1 SPEED-S5 Volt 65 – 225 225
Pr62 M10 – 03 – 08 Heat exchanger 3 (ducting 2) in power 1 work phase DUCT.2 SPEED-S1 Volt 65 – 225 65
Pr63 M10 – 03 – 09 Heat exchanger 3 (ducting 2) in power 2 work phase DUCT.2 SPEED-S2 Volt 65 – 225 65
Pr64 M10 – 03 – 10 Heat exchanger 3 (ducting 2) in power 3 work phase DUCT.2 SPEED-S3 Volt 65 – 225 65
Pr65 M10 – 03 – 11 Heat exchanger 3 (ducting 2) in power 4 work phase DUCT.2 SPEED-S4 Volt 65 – 225 65
Pr66 M10 – 03 – 12 Heat exchanger 3 (ducting 2) in power 5 work phase DUCT.2 SPEED-S5 Volt 65 – 225 65
Parameters “VARIOUS SETTINGS” - Mod. DSC (L15_181119)
Parameter Menu level Description Display Measurement Value field
Database
P2
Pr38 M10 – 04 – 01 Re-ignition block RESTART BLOCK Minutes 0 – 10 5
Pr39 M10 – 04 – 02 Time for considering the device off OFF TIME Minutes 0 – 20 10
Pr40 M10 – 04 – 03 Pre-loading time in ignition PRE-LOAD START Seconds 0 – 255 210
Pr41 M10 – 04 – 04 Stand-by time after pre-loading AFTER PRE-LOAD Seconds 0 – 255 120
Pr42 M10 – 04 – 05 Extractor speed in pre-loading phase
PRE-LOAD SMOKE
SPEED
Rpm 350 – 2800 2100
Pr43 M10 – 04 – 06 Temperature delta on “SET ROOM” for automatic switching on/off DELTA ON-OFF °C
0.0 – 10.0 1.0
Pr44 M10 – 04 – 07 Automatic switch-off delay (timer after reaching “SET ROOM”) AUTO OFF DELAY Minutes
2 – 120 10
Pr45 M10 – 04 – 08 Power change delay POWER CHANGE Seconds
0 – 240 60
Pr46 M10 – 04 – 09 Heat exchanger 1 speed (primary) in the switch-off phase AIR SPEED OFF Volt 65 – 225 225
Pr47 M10 – 04 – 10 Keypad lock enable KEY LOCK On – Off On – Off Off
Pr48 M10 – 04 – 11 Time after which an alarm is triggered in the event of a blackout BLACK OUT TIME Seconds 0 – 60 30
Pr49 M10 – 04 – 12
Time after which the “NO PELLET” alarm triggers In case of “PELLET
RESERVE”
RESERVE ALARM Minutes 1 – 180 60
Pr50 M10 – 04 – 13 Enabling of the pellet level sensor (only on configured models) PELLET RESERVE On – Off On – Off Off