klover DIVA SLIM, Установка, использование, техническое обслуживание и полезные советы

Страница: 33 / 52

DIVA SLIM AIR PELLET STOVE
31
EN - Rev. 1.0
During the work phase, the appliance enters the “MODULATION” economy mode when this temperature value is
reached (see “Work phase”) .
Modifying the power set-point
- To modify the working power, simply select “SET OUTPUT” by pressing button 2 (Decrease).
- Press buttons 1 and 2 (Increase and Decrease) to modify the value and confirm with button 4 (Set) or 5 (Esc); it is
possible to set a power value between 1 and 5.
- By pressing button 3 (On/Off) or waiting a few seconds without confirming, the set value is not saved.
During this operation, the display will appear as shown below:
Modifying the ducted air speed set-point
- To modify the speed of the ducted air fans (1 or 2, depending on the specific model), simply select “SET DUCTING”
by pressing button 5 (Esc).
- Press button 2 (Decrease) to modify the value associated with the zone 1 ducted air fan and confirm with button 4
(Set) or 5 (Esc); it is possible to manually set a speed value between 1 and 5, or an automatic speed (A) associated
with the value set under “SET OUTPUT” (see “Modifying the power set-point”).
- By pressing button 3 (On/Off) or waiting a few seconds without confirming, the set value is not saved.
During this operation, the display will appear as shown below:
Modifying the temperature set-points of the ducted rooms
Consult the information in the “THE MENU” chapter under the paragraph “Menu 12 – Set Room Duct.”.
SET DUCTING 1
(speed of the zone 1 ducted air
fan)
SET OUTPUT
(Working power settable to
between 1 and 5)