KlipXtreme TuneFiBuds KTE-050, Руководство пользователя

Страница: 4 / 14

3.2 Turning your earbuds on or off
1. Remove the earbuds from the charging case or press
and hold the multifunction button for 3 seconds to
power them on.
2. To turn the earbuds off, put them back in the
charging case or tap the multifunction button for 5
seconds.
4. Advanced operation
4.1 TWS pairing
Simply take the earbuds out of the charging case. The
earbuds sync with each other automatically and then
enter into mobile pairing mode.
Note:
Before installing the product, please make sure
your device is
Bluetooth ®
compatible.
4.2 Pairing the earbuds with your mobile device
1. Remove the earbuds from the charging case or press
and hold the multifunction button for 3 seconds to
turn them on. Both earbuds will pair automatically.
2. Set your
Bluetooth
®
mobile device to “discover” the
wireless earbuds.
3. Place the earbuds and your mobile device not more
than three feet from each other.
4. The LED light in the earbuds blinks green and white.
Both are ready to enter pairing mode.
5. On your mobile device, tap the newly discovered
audio device
KTE-050
being displayed in the
Bluetooth ®
list.
6. When the mobile device asks if you want to pair with
it, click
Yes
or
OK
to accept.
7. If pairing is successful the “connected” prompt is
heard and the earbud LED indicator blinks white.
8. If after 60 seconds the pairing process fails, please
repeat steps 1 through 6 as described above.
9. The earbuds automatically go into standby mode
after a short period of inactivity to save battery life.
10. You only need to pair the earbuds with your mobile
device once, as they will reconnect with memorized
devices automatically.
4.3 Using the wireless earbuds
1. Answering and ending a call
• When there is an incoming call, your phone will ring
along with a tone through your earbuds.
• Touch the multifunction button once on any earbud
to pick it up. You may also press the answer button
on your mobile phone to receive the incoming
communication in your earbuds.
• To end a call, press the multifunction button once
again on any earbud. Likewise, you may also finish the
call directly using the end key on your smartphone.
• To ignore an incoming call and send the caller to
voicemail, touch and hold the multifunction button
for 2 seconds.
IMPORTANT:
Since the control buttons are
sensitive to the touch, ensure to hold the
earbuds by the stem when handling them. This
will avoid accidentally tapping the touch buttons