Thank you for purchasing the motorized projection screen from KlipXreme
®
. Ideal for home
theater applications and business presentations, this durable projection screen can be mounted
on the wall or ceiling. This unit features a controller wall switch plus a wireless remote to
control your screen from anywhere in the room. Please follow the instructions below for
proper operation and care of the product.
We invite you to visit us at
www.klipxtreme.com
for support and to find out more about our
full line of projection screens and other new and exciting products.
The screen must be installed on a flat, level position.
The ceiling or wall structure must be capable of supporting at least five times the weight of the
projection screen. Otherwise, the wall structure must be reinforced.
The screen should be securely mounted to avoid vibration and to withstand daily use.
Before sliding the screen back to the case, make sure its surface is completely clean.
Refrain from hanging anything on the screen as it may cause the screen to fall.
I. Introduction
1.
2.
3.
4.
5.
6.
7.
8.
9.
Case
White matte surface
Metal hooks
Integrated wall mount bracket
End cap
Slat rod
Receiver/controller wall switch
Remote control
Set of 4 screws and anchors
• Projection screen with wired controller switch
• Wall mounting plate and hardware
• Remote control with battery
II. Package content
III. Product overview
IV. Installation
English
Warnings
1.
2.
3.
4.
5.
Carefully unpack screen from carton box. Remove any protective foam or tape from case
before operation.
DO NOT use a knife or sharp object to cut tape or nylon, to avoid damaging the screen.
The screen comes with metal hooks and integrated mount brackets. Use the metal rings
attached to hang the screen from the ceiling, and the integrated brackets if you prefer to install
it on the wall, as illustrated below:
1.
2.
7
8
Wall installation
Ceiling installation
9
4
5
6
