KLINGER CMF U Series Скачать руководство пользователя страница 7

Страница: 7 / 70

Klinger CMF

Instruction Manual

Page 7

Chapter

Installation

2.1 Preparation before installation

2.1.1 Environmental consideration

The SCM must be appropriately configured for its installation environment. Exposing the CMF

to an unapproved environment can reduce the lifespan of the instrument, void warranty

and/or liability statements, and is dangerous. To confirm that the CMF is configured for the

installation environment:

2.1.1.1 Ensure the explosion-proof certification marks on the nameplates meet or exceed the

required rating of the relevant installation environment.

2.1.1.2 Ensure that the enclosure rating indicated on the nameplates meet the requirements of

the installation environment.

2.1.1.3 Ensure that the ambient and process temperature ranges indicated on the nameplates

meet the application requirements.

See details in Figure 2-1

Figure 2-1 mass flowmeter temperature range

2.1.2 Mechanical Factors

The location and orientation of the SCM can have a large impact on its accuracy, ease of use,

and ease of maintenance.

2.1.2.1 Enough Installation Space

Meet the needs of installation, maintenance and observation.

2.1.3 Product Status

2.1.3.1 Integrated product has no wiring of sensor and transmitter.

2.1.3.2 Special cable for Walsn mass flow meter allocated for Remote product (Ensure length to

meet the installation and use requirements).

2.1.4 Installation location

2.1.4.1 Sensor

Ideal installation location will get the best product performance

Consider the following criteria when choosing the location of the

SCM 2.1.4.1.1 Away from sources of electromagnetic interference

Содержание CMF U Series







































































Результаты поиска

Содержание CMF U Series

Отзывы:

Похожие инструкции для CMF U Series

Бренды по названию

Популярные бренды

KLINGER CMF U Series, Инструкция по эксплуатации

Результаты поиска

Содержание CMF U Series

Отзывы:

Похожие инструкции для CMF U Series

Бренды по названию

Популярные бренды