User's Manual
K&F SONA 5
KLING & FREITAG GMBH © 2017
Version 3.8
Page 6 of 23
The technicians installing the speaker on site are responsible for and guarantee safe setup
and use.
Never use signal cables or power cords for suspending, aligning, or securing the systems.
Before installing, check the stability, strength, and materials of walls, ceilings, and boarding.
For example, use suitable rawlplugs for wall panels and make sure the strength is sufficient.
Be sure to tighten all bolts and screws to the specified torque.
Unless otherwise stated, use only KLING & FREITAG original parts for mounting the speakers.
Never use other parts (in particular, parts not made by KLING & FREITAG).
Make sure all fittings used are suitable for the task at hand and meet all relevant safety
requirements.
Ensure that all connections are secured against coming loose and that only authorized,
statically tested and correctly sized supports, mounting equipment, wire ropes and chains are
used.
Be sure to always visually inspect all safety-related speaker and accessory components
before use. If there are signs of wear, cracks, or deformation, etc., replace the affected parts
immediately. Visual inspection also includes checking all screwed connections of supporting
components.
The information described here does not relieve the user of the duty to follow the given
safety requirements and legal regulations.
Fixed installations (stationary):
•
For fixed installations without safety, always secure the retainer nut and the M10
thread of the thread reducer to prevent loosening. ou can do so either by using the
provided rubber washer or – with longer threads – glue for securing screws.
Mobile installations (non-stationary):
•
Always secure the speaker with a second independent safety device to prevent falling.
•
To do so, use an approved safety rope with a 5 mm quick link on the safety eyebolt of
the speaker enclosure. You can get an appropriate quick link available as an accessory
from KLING & FREITAG.
