User's Manual
K&F SONA 5
KLING & FREITAG GMBH © 2017
Version 3.8
Page 12 of 23
Operation with a Controller
When operating the loudspeaker with amplifers without clipping limiter and nominal
amplifier power less than 100W@16Ohm requires to set a Limit Reduction of 3 dB for the
K&F CD 44 controller. You can find more detailed information about this option in the
K&F CD 44 hardware user's manual.
8.
Wiring
Warning
Speaker-signal currents are potentially hazardous to the human body.
When the system is in use, make sure that the connectors are secured against inadvertent
touch.
Always fully insert bared wire ends into the push connector or the Phoenix plug such that
bared parts of wire can not be touched.
For speakers with Phoenix connector the bared wire ends have to be accurately screwed into
the plugs.
8.1
Terminal assignment
Clamp connector
Option 'Phoenix
connectors'
Option '100 Volt' with
Phoenix connectors
