KLING & FREITAG SEQUENZA 10, Руководство пользователя

Страница: 41 / 69

User's Manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2017 Version 6.5 Page 41 of 69
12.3 SEQUENZA 10 N/W stacked on SEQUENZA 10 B
1. Stack the subwoofers on top of one another.
2.
Slide the joint plate out of the
speaker by reaching into the access
opening (A) and pushing the joint
plate up.
Secure the joint plates with the two
Quick Release Pins (B) and (C).
3. Proceed accordingly with the three remaining plates that connect the subwoofers.
4. As needed, repeat the process for the next subwoofers that are stacked on one another.
5.
Lay the flying frame on top of
the uppermost subwoofer, as
illustrated.
Slide the joint plate out of the
speaker by reaching into the access
opening (A) and pushing the joint
plate up.
Secure the joint plates with the two
Quick Release Pins (B) and (C).
6. Proceed accordingly with the three remaining plates of the subwoofer.
7. The remainder of the setup is the same as the stacked SEQUENZA 10 N/W » Mounting
the Speakers, see page 37.