KLING & FREITAG SEQUENZA 10, Руководство пользователя

Страница: 36 / 69

User's Manual K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2017 Version 6.5 Page 36 of 69
12. Stacked Setup
12.1 SEQUENZA 10 N/W stacked
12.1.1 Preparing the flying frame
The feet are available as optional accessories and serve to guarantee the stability, balance out
unevenness, and align the frame. Keep in mind that under certain circumstances, the feet can
leave marks on the ground.
Warning
It is not permissible to stack the speakers on the flying frame without the optionally
available hinged heavy-duty feet!
When setting up, double-check each fixing pin for secure fit. As long as you do not push the
button in the middle of the pin, you should not be able to pull out the pin.
1.
Take the rear foot out of the park
position and insert it into the back
of the frame.
2. Remove the top Quick Release Pins on the front end of the flying frame and turn the
hinged fitting between the metal plates so that one leg of the hinged fitting is pointing
upwards.
3.
Secure the hinged fitting (A) in this
position with the Quick Release Pin
(B).
A
B
4. Take one front foot out of the park position and insert it into the front of the frame.
5. Proceed accordingly with the other side.