15
24.05.2019
Filtering unit
UFO-A-5000
NAVIGATION
The
UFOx5.1
controller includes a built-in control keyboard, for setting the work parameters.
The keyboard is installed on the right side and consists of 6 micro-switches.
RETURN TO THE MANUFACTURER’S SETTINGS
– press the
ESC
button and hold it
through 10 seconds.
Navigation on the “linear” menu:
UP
– next screen
DOWN
– previous screen
Navigation on the “nested” menu:
RIGHT
– lower level of the menu
LEFT
– higher level of the menu
How to change the editable parameter:
OK
– marking (illumination) of the parameter
RIGHT
,
LEFT
– displacing the cursor between the fields that are possible to be marked
UP
,
DOWN
– change the value of the illuminated parameter
OK
– confirm and leave the edition mode
ESC
– leave the parameters without confirmation
GENERAL MENU
Status
= RUN
Board
= OK
STATUS screen
(Status):
RUN
– a mode of work
NSTR
, the
OUT1
output is switched on
STOP
– the state of stop, the
OUT1
output is switched off
(Board):
OK
– correct state of the functional elements of the board
UFOv5.1
EO1
– alarm of the memory of the data
EO2
– alarm of the sensor of the temperature measuring
EO3
– alarm of the
RTC
clock