background image

 

 7 

 

 

 

 

11.10.2019

                                       

dust separator

  EGO-2

;

 EGO-4

 

 

9.  Maintenance 

Periodically,  every 12 months,  carry out a technical revision. Check periodically the state of 
following elements:  the bag filter,  (cartridge filter),  waste bag and the fan.  Take off the bag  
filter,  release the clamp (hoop)  and then remove the dust with a dry soft brush.   
Similarly,  in case of the cartridge filter, the dust must be removed from inside the pleats and 
check  if there are no damages.   
Here,  it is recommended  to use the industrial vacuum cleaner.  Check the technical state of  
the fan according  to the principles  of operational use  of electrical drive devices.  During the 
maintenance activities check the mechanical and electrical connections. 

 

 

 

  Any checks and technical revisions must  be carried out after discon- 

nection  from  the  power supply system

.   The bag filter has to  be replaced after a period,

 

depending on the technical conditions of operation. 
 

10.  Occupational Health and Safety 

Both, start up

 and the operational use are exclusively admissible after getting acquainted with 

with the contents of the present Use and Maintenance Manual. 
The fan motor has to be connected to the power mains, according the valid regulations within  
the range of personnel protection  from electrical shock  and  from short-circuit- and overload 
effects in accordance with the standard of electrical installations in buildings. 
 
After the completed work,  leave the separator in the ultimately used position,  if this does not  
cause barrier to User/personnel and hazard the other people being in the process room. 

 

 

  Do not  start  the EGO separator  when  the protective grill is removed 

from the fan inlet and  when the head with connections 

(

or elbow, T-piece

)

 is not instal- 

led. 
While the fan motor is running 

– do not approach your hand near the unprotected inlet,  

when the suction hose is not fastened there.    
As the impeller is still rotating 

– this could  cause hazard  and  drag your hand into the 

impeller chamber. 

 

 

–  In case of power supply interruption, 

the WS

 motor protective switch will not 

discon

nect the device. 

–  The device restarts automatically upon power supply regain. 

 

11.  Transport and Storage 

Storage

 is only possible in dry rooms and in areas of efficient ventilation, free from aggressive 

substances.   
As the 

EGO-4 N/W

 separator is significantly large 

– the cartridge filter is transported separate- 

ly (disassembled).  The cartridge filter is placed in a cardboard. 
For the time of transport, protect the device from slide and overturn.  Do not place one device  
on top of another. 
During the transport, loading/reloading protect the device from scratching, indents.  Important  
is that the markings on the package surface would not get detached or obliterated. 
 

 

 

Содержание EGO-2









Отзывы: