5
11.10.2019
dust separator
EGO-2
;
EGO-4
The cleaned air remains in the process room (recirculation), to avoid the temperature loss in
winter. When the lower waste bag is filled-up it has to be emptied, whereas the filters are pe-
riodically regenerated. To regenerate the filter, shake it by striking around, subsequently the
impurities will drop into the waste bag. Fig. No.3 illustrates examples of applications.
Fig. No.3
– Example of the application
6. Assembly and Start-up
The appliance is designed for operation in closed rooms. Simply, the device has to be placed
stably on the even floor surface, whereby important is free access to the motor protective switch
and to the waste bag. Additionally, there should be unrestricted access of cooling air flow to
the motor.
For safety reason, the fan inlet is protected with a cover, to avoid acci-
dential inserting of the operators hands and to protect the inlet from foreign objects /
debris that would be drawn into the impeller chamber
. Prior to the start-up
– remove the
protective cover and install the connection head, (elbow or T-piece).
Do not start the motor
at the open
(
unprotected
)
inlet
.
In case of EGO-4 N/M, (before the operation), first install the cartridge filter because it was dis-
assembled for the transport. Remember to fasten the clamping hoop and to tighten up the four
clasp locks on the filter flange.
Connect the suction nozzles on the processing machine (or of the local exhausts) by means of
hoses with the connections of the EGO dust separator. EGO separator is energized through
the power lead cord with a plug. The supply voltage is 3x400V/50Hz.
The motor is started and stopped by means of a motor protective switch with short-circuit- and
overload protection.
