4
dust separator
EGO-2
;
EGO-4
11.10.2019
Table No.3
Sort of the connection fitting
piece
Type
Connections
Application
Remarks
Quantity
[pieces]
Diameter
[mm]
connection
head
G-2
2
125
EGO-2
Each fitting piece
can be equipped
with a suitable
reducer (see
catalogue card
“INSTALLATION
ELEMENTS”)
connection
head
G-4
2
2
125
160
EGO-4
connection T-
piece
TR-2
TR-4
2
2
160
200
EGO-2
EGO-4
connection
bend
K-2
K-4
1
1
160
200
EGO-2
EGO-4
Spare parts
Table No.4
Sort
Type
Weight
[kg]
Application
cartridge filter
CP-2
7,85
EGO-2-N/M
CP-4
9
EGO-4-N/M
filtration bag
WF-2
0,4
EGO-2-W/M
WF-4
0,5
EGO-4-W/M
collective waste
bag
T2
0,1
EGO-2
T4
0,1
EGO-4
Table No.5
Dust collecting nozzle
Type
Connection diameter
[mm]
slot length
[mm]
S-100/L
S-125/L
100
125
300
500
5. Structure and Function
Dust separator consists of a housing based on a trolley for a convenient displacement. To the
housing is fastened a motor with impeller (conveying the air with impurities). On the motor is
placed a motor protective switch with short-circuit- and overload protection and a power lead
cord ended with a plug.
Underneath the housing is located a waste bag, whereas above the housing is installed a bag
filter of filtration fabric (EGO-2 W/M, EGO-4 W/M) or cartridge filter (EGO-2 N/M, EGO-4 N/M)
Fig. No.1; Fig. No.2. Nearby, on the housing is placed a head with connections equipped
with slide dampers.
Instead of
the connection head can be installed an elbow Ø200 mm (EGO-4), elbow Ø160 mm
(EGO-2), or a T-
piece 2x Ø200 mm (EGO-4) a T-piece 2x Ø160 mm (EGO-2).
Elbows and T-pieces are not equipped with slide dampers.
The suction-inlets on the processing machines (or workplaces) have to be connected by hose
with the connections of the EGO dust separator.
To the terminations of hoses can be fastened a dust collecting nozzle to clean the workplace
after the finished work.
In the EGO dust separator proceeds separation of the impurities: heavy particles drop into the
waste bag, whereas light fraction deposit on the filter walls.
