Klimawent
– the warranty of highest quality at attractive price
02.03.2021
Filtering unit BIG-1000
9 of 19
The
BIG-1000-R
and
BIG-1000-O
units enable cooperation with
ERGO-L-R
extraction arms of manufacturer
KLIMAWENT S.A.
in lengths of
2 or 3 m
and a connection diameter of Ø160 mm.
Additionally, the
BIG-1000-O
device enables the installation of an arm with a length of up to
4 m
.
! CAUTION
BIG-1000-O
unit
MUST
have its legs attached to the ground when the
ERGO-L-R 4m
arm is mounted on the device!
NOTICE
To select the appropriate extraction arm adapted to work with the
BIG-1000
unit, please
contact the manufacturer
KLIMAWENT S.A.
! CAUTION
The device
MUST
be connected to the compressed air network, free from any impurities,
oil and moisture and prepared by an appropriate filtering and reduction unit ensuring
stable parameters!
Before starting
, the unit should be connected to a
compressed air system
with a pressure of
0.6 to 0.8 MPa
.
The device should be connected to an electric power supply of
230V
and
50Hz
.
COMMISSIONING
Before starting the device for the first time, do the following:
A.
Check that the electrical parameters are matched to the motor.
B.
Check the correctness and durability of the PE conductor connection.
C.
Check the correct selection of the protection in the circuit powering the device.
D.
Check the correctness of the selection of the capacity of the compressed air system connected with
the cartridge filter regeneration system:
minimum 225 litres/h
.
E.
Check that the extraction arm is correctly selected and attached to the device.
! WARNING –
Possible damage to the devices
The
BIG-1000-R
unit
CANNOT
work with the
ERGO-L-R
extraction arm longer
then
3 m
! The unit may fall over!
OPERATION
TERMS OF USE
The filtering unit
BIG-1000
should only be used indoors, protected from the influence of precipitation and
moisture at a temperature of
-10ºC
to
+40ºC
.
Connect the devices to the process network of compressed air, free from any
impurities
,
oil
and
moisture
and prepared by an appropriate filtering and reduction unit ensuring stable parameters.
Moisture
or
oil
in the
transported air and in the air used to regenerate the filters
can damage
the filters!
! CAUTION
The device
CANNOT
be used for forcing air at temperatures above
+60ºC
!
