Klimawent
– the warranty of highest quality at attractive price
14 of 19
Filtering unit BIG-1000
02.03.2021
General guidelines
A.
At least every
12 months
, check the technical condition of the fan and the electric motor following the
principles of operation of electric drive devices.
B.
Cartridge filters should be replaced after a period of operation from 1 to 2 years or when the
regeneration in the device does not give the expected result in the form of a constant return to the
required output of the device.
Guidelines for cartridge filters
A.
Check the condition of the cartridge filter during each operation of emptying the tank for dust. Check
the correct fit of the filter mounting elements, the condition of the filtering surface, the degree of
contamination, the presence of damage or foreign bodies, sticky and difficult to remove deposits,
moisture, etc.
! CAUTION
Moisture or oil in the transported air and in the air used to regenerate the filters can
damage the filters!
Connect the devices to the process network of compressed air, free from any impurities,
oil and moisture and prepared by an appropriate filtering and reduction unit ensuring
stable parameters.
B.
When the
H3
alarm occurs, remove the filter from the unit and clean it manually or mechanically using
a device designed for this purpose – contact the manufacturer
KLIMAWENT S.A.
C.
The filter shall also be inspected in the event of other malfunctions in the operation of the device. In
the event of normal wear or damage or perforation of the cartridge filter, replace it with a new one –
see 5.1 Spare parts (consumables).
Guidelines for compressed air tank
The compressed air tank must be checked and maintained following the regulations for pressure equipment.
Periodically check all tank connections and drain the tank through the valve installed for this purpose in the lower
connector of the tank.
Guidelines for solenoid pulse valve
The applied solenoid (air pulse) valve does not require ongoing maintenance. It is enough to check the
condition of electrical connections, grounding and tightness of the pneumatic system.
RECYKLING AND CASSATION
! CAUTION
When the product is transferred for cassation, the provisions on the erasing of machines
withdrawn from use and/or recycling of waste should be applied. No part of the
equipment belongs to the hazardous waste group.
OHS MANUAL
! CAUTION
The device as a machine meets the safety requirements of
Directive 2006/42/EC
but
requires additional safeguards for safe use. Follow the instructions in this manual.
Start-up and operation of the device may only take place after reading this manual. The
device is not dangerous if it is operated following this manual!
