Klimaire KSWT SERIES, Руководство по обслуживанию

Страница: 5 / 17

3 .3 How to fix installation plate
The wall you select should be strong and solid enough to
prevent vibration
3 .3.1 Mount the installation plate on the wall with
four type A screws. If mounting the unit on a
concrete wall, use anchor bolts.
• Mount the installation plate horizontally by aligning the center-
line using a level.
3 .3.2 Measure the wall and mark the centerline. It
is also important to use caution concerning
the location of the installation plate-routing
of the wiring to power outlets is through the
walls typically. Drilling the hole through the
wall for piping connections must be done
safely.
• For right rear piping and left rear piping, draw a
line in the direction of the arrow marked "D". The
meeting point of the two lines is the center of the
hole.
5-7mm
(0.2~0.3")
Indoor
WALL
Outdoor
Installation Plate
Marking-off line
Thread
Weight
Type "A" screw
A,B
A,B,C
C
D
D
A,B,D
C
A
B,D C
ø70mm
Left rear piping Right rear piping
Hole Center Installation plate
• Drill the piping hole with a ø70mm hole core drill.
Drill the piping hole at either the right or the left with
the hole slightly slanted to the outdoor side.
3 .4 Drill a hole in the wall
• The position of the center of the hole.
D
D
D
D
Left holecore position Right holecore position
5
Air Conditioner Service Manual