Klever X SPEED, Руководство пользователя

Страница: 42 / 56

42 www.klever-mobility.com
Tecnhical data
General tightening torques for DIN bolts:
Bolt M4 M5 M6 M8 M10
Tightening torque in Nm 2,9 5,5 9,5 23 46
The torque indications always refer to the upper limit of the
screws resilience.
You should always adjust the torque key to a little more than
50% of the value stated by the manufacturer and tighten the
bolt. Check the firm fit. In case the clamping connection is
not strong enough, increase the value gradually in steps of
0,5 Nm.
If necessary, adjust the maximal value (never exceed it) and
loosen the bolt by half a revolution before finally tightening it.
Tools:
1. Allen keys
2. Combination wrenches
3. Sockets and Bits
4. Torque Wrench
5. Torx keys
6. Tyre Lever
The gross vehicle weight of the Speed Pedelec:
Rider + v luggage = 150 kg.
Tyres:
Size: 62-584 mm. (27.5” x 2.40”)
Recommended tyre pressure: 2.0 – 4.0 bar (30 – 55 Psi)
Wheel circumference approximately 2.220 mm.
The exact circumference depends on the tyre pressure and
the total weight of Speed Pedelec and cyclist.
1.
3.
5.
2.
4.
6.